Info
Info
News Article

Cooking Up Efficient Perovskite Solar Cells

News

Additive DMSO favours crystal growth ... but only up to a certain point, says Helmholtz-Zentrum Berlin team

Solar cells made of crystalline silicon still account for the lion's share of roof installations and solar farms. But other technologies have long since become established such as those that convert sunlight into electrical energy through use of extremely thin layers of solar-cell material deposited upon a substrate.

The perovskite solar cells that Eva Unger and her team at the Helmholtz-Zentrum Berlin (HZB) are researching have efficiencies approaching those for cells made of crystalline silicon. But industrial-scale fabrication is still a long way off.

But now her team is taking the next step and developing scalable methods for coating larger surfaces.

At the Hybrid Silicon Perovskite Research, Integration & Novel Technologies (HySPRINT) Innovation Lab, an infrastructure for collaboration between HZB and industry, the team is concentrating on processes that have already proven their importance in industry to start with.

"We have experimented here with slot-die coating", she explains. In this process, the 'ink', as the thin liquid solution of perovskite precursor, solvent, and additive is known in the trade, flows from a slit-shaped nozzle and falls like a curtain onto the glass substrate being conveyed below that will later become a solar cell. After application, crystallisation begins and an ultra-thin layer of a semiconducting perovskite structure grows.

Unger, together with her team members doctoral student Jinzhao Li and Janardan Dagar, have now discovered that the exact amount of the organic solvent dimethyl sulphoxide (DMSO) in the material ink is critical for this process.

(The picture above shows the liquid solution of perovskite precursor, solvent, and additive flows from a slit-shaped nozzle onto the glass substrate being conveyed below.)

Unger uses it as an additive because it has an remarkable effect on the ink. "DMSO induces crystallisation nuclei for the perovskite", says the researcher. Crystallisation nuclei usually are tiny grains that help jump-start a crystal and promote its growth. "During X-ray diffraction experiments at BESSY II, we saw quite a big difference between inks with and without DMSO added", the physical chemist explains.

However, as her team has found out in many experiments, the amount added plays a decisive role here. More DMSO favours crystal growth - up to a certain point. If this is exceeded, other processes come into play and the resulting microstructure reduces the performance of the solar cells.

"It's like seasoning a soup", says Unger. "If you add too little, it remains bland. If you add too much, it won't taste good either. So you need to add just the right amount to make it best." In addition to the optimal composition, the HZB team has also thoroughly investigated the ageing processes and thus the storage life of the inks. "This is an aspect that has received little attention so far", Unger explains. "The age of a perovskite precursor ink can influence device performance. This is an important factor that must be considered when developing inks and processes."

'20.8 percent Slot‐Die Coated MAPbI3 Perovskite Solar Cells by Optimal DMSO‐Content and Age of 2‐ME Based Precursor Inks' by Jinzhao Li et al; Advanced Energy Materials 25 January 2021

106 MW BayWa R.e. Solar Farm Now Supplying Green Energy To Northern Victoria
IEA Predicts Record Year For Renewables In 2021
Italian Solar Acquisition Focusses On Local Biodiversity And Agricultural Benefits
Solliance Partners Make 28.7 Percent Efficient Tandem PVs
Fujitsu, AutoGrid To Boost Renewable Energy Use In Japan
World-leading Circular Solution For Charging Of Vehicles Inaugurated
Q CELLS Supplies 287 MW Of Modules For Large-scale Solar Project In Angola
Accelerated Planning Of Solar Systems: IBC SOLAR’s Planning Tool PV Manager
Power Roll,Thermax Global Target Market For Solar Film In India
40 MW Energy Storage Project Highlights Wärtsilä’s Technical Capabilities
Aquila European Renewables Income Fund Expands Portuguese Solar Portfolio
IIT Delhi Chooses Samco System For Solar Cells
Schletter Mounting Systems For EnBW’s 300 MWp Project East Of Berlin
AEROCOMPACT Presents Piling Systems For Medium-sized Solar Parks Onto The Market
SSE Renewables Chooses SEANEX Connection System For Seagreen Offshore Wind Farm Project
Midsummer Increases Solar Panel Orders By 550 Percent
Exus Annouces Development Of 85MW Wind And Solar Hybrid Project In Portugal
IBC SOLAR And Enphase Energy Enter Into Distribution Partnership For Microinverters And Storage Systems
Solar Thermal Software Expanded In New Version T*SOL 2021
BayWa R.e. Expands Agri-PV Pilot Setup And Completes First Fruitvoltaic Solar Farm
170MW Sonnedix Atacama Solar PV Plant Inaugurated By President Sebastián Piñera Of Chile
First Solar Series 6 CuRe Has Industry’s Lowest Warranted Degradation Rate
IIT Delhi Selects Samco Multi-Chamber CVD System
Sonnedix Closes EUR 172M Financing For 55MW Sonnedix Hitachi Juo In Japan

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Solar + Power Magazine, the Solar + Power Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification} Array
Live Event