News Article

CPV: Boosting The Bang-per-buck

Increasing concentration and streamlining production improves the capability of CPV


Raise expectations and optimism comes to the fore. But go on
to dash these hopes, and what is left is a very bitter pill to swallow. Just
ask those that have worked in the CPV industry. Their hopes soared at the
beginning of the credit crunch, when manufacturers of silicon solar panels
started fretting about the supply of raw materials. So great were those
concerns that when these PV makers started to consume more material than the
microelectronic sector, prices of the silicon panels ceased their steady decline.
Instead, they headed north, setting alarm bells ringing. Could silicon ever
reach grid parity? And could production of this technology ever reach a level
where it could make a meaningful impact on the globe's carbon footprint?

Offering a solution came CPV. Leaping into the void were
several start-ups promoting technologies that could generate a great deal of
power from far less semiconducting material and a smaller land area than ever
before. But before these firms really got going, silicon prices plummeted,
killing off chances of significant success. Only a few hundred megawatts of CPV
have ever been deployed, a figure dwarfed by that of silicon - to put volumes
into perspective, shipments of silicon panels now total more than 100 gigawatts
per year.

During the ALCHEMI project, cells are added to the module by
hand. This can be automated for high-volume manufacture (image copyright PSL).

So CPV is down - but it is by no means out, thanks to
several on-going initiatives. Leading the way is the Canadian energy supplier
STACE, which bought the CPV technology of Soitec. STACE continues to invest in
CPV, having just established an operational production line. There is also
Sumitomo Electric Industries, which is producing CPV systems that are
generating electricity in northern Africa; RayGen of Australia, a user of
multi-junction cells in systems that employ a vast array of mirrors to focus
light on a relatively small area of a CPV receiver, to generate both
electricity and heat; and several companies that are investigating
micro-tracking technologies.

In Europe, where much of early CPV development took place,
activity includes a three-year project entitled ALCHEMI - A Low-Cost, High
Efficiency, Optoelectronic HCPV Module for 1000 Sun Operation. Through this
programme a team is refining the performance of modules designed and developed
by the UK-firm Fullsun. Other partners in this European effort are IQE,
Fraunhofer ISE, the Technical University of Madrid and the University of

The CPV module is only about 55 mm-thick, thanks to the
short focal length of the optical system. It is formed from a square
silicone-on-glass Fresnel lens and a dome-shaped secondary objective that sits
on top of the cell.

“It's all about increasing the overall efficiency of the
system and reducing the cost,” explains project co-ordinator and spokesman,
Andrew Johnson, who is IQE's Solar Business Unit Leader and Director of PV
Technology. Primarily, the increase in efficiency and the reduced costs come
from increasing the concentration on the cells from 625 suns to 1000 suns.
Modules operating at this higher value have just been built, and are soon to be
evaluated by several partners in the project, in both dedicated labs and
outside, in sunny climes.

Much thought has been put into the design of the Fullsun
module and how it is produced. The modules are much thinner than those made by
the first generation of CPV firms, enabling a trimming of weight and material
costs. Another attribute of the design is the use of very small cells, which
are prevented from running too hot by dissipating their heat to the aluminium
back plate. Manufacture is streamlined, using surface-mount technology and
pick-and-place tools, replicating the approach taken in the LED industry. This
allows outsourced production, avoiding the need for large capital investment in
a dedicated facility.

Benchmarking success

The benchmark for the ALCHEMI project is Fullsun's
first-generation module. Incorporating multi-junction cells with a 37 percent
efficiency, it delivers a DC module efficiency of 30 percent. The target for
the third-generation module - the second-generation got no further than the
drawing board - is to raise the DC module efficiency to 37 percent using 41
percent cells. This will be realised while operating at 1000 suns.

One obvious question is why stop there? Would it not be
better to move to an even higher concentration, and get an even better bang per
buck? That's not unchartered territory - Semprius' modules operated at 1800

But right now, this could be a step too far. “The higher the
concentration you go, the higher the pointing accuracy needs to be,” says
Johnson, who points out that heat dissipation also becomes more of an issue. In
addition, the efficiency of the cell can pass its peak. “There will always be
some series resistance issues in the epi-stack that will adversely affect the

By operating at 1000 suns, the third-generation modules
should avoid any overheating. “We have done some thermal modelling as part of
this project, and it's clear that we don't have to worry about any extra heat
sinking,” explains Johnson. Calculations suggest that during operation, cell

should range from only 34 °C to 47 °C above ambient, a rise
that is far less than that of a typical CPV module.

In the Fullsun design, two lenses are used to focus sunlight
onto the cells. Light enters the module through a square Fresnel
silicone-on-glass lens with sides of just over 30 mm. The light that leaves
this lens is directed onto a dome-shaped silicone secondary objective, which
sits on top of the cell. Moving from 625 suns to 1000 suns requires a change to
the optics. Due to project budgetary constraints, the team decided to realise
this by simply modifying the Fresnel lens. This extended the focal length of
the system from 43 mm to 49 mm and led to a small increase in the thickness of
the module - but, in relative terms, it is still thin.

A dome-shaped silicone secondary objective sits on top of
the cell

The cells used in the third-generation modules are square,
with sides of 1.3 mm by 1.3 mm. The optics focus the light to a spot that is
just 1 mm by 1 mm, so there is contingency in the design. So, if there is any
imprecision in focusing, which could lead to the spot wandering over an area of
1.2 mm by 1.2 mm, it is not an issue, as all the radiant power still impinges
on the cell.

Evaluating architectures

To evaluate the most common multi-junction cell structures,
the modules made in the ALCHEMI project have been populated with three
different designs. Those that have been chosen have either a conventional
architecture, an inverted metamorphic heterostructure, or an epitaxial stack
that features a dilute nitride layer. IQE produced the epiwafers for the conventional
design, with processing of the cells undertaken at the University of Madrid.
The metamorphic design, containing cells based on GaInP, GaInAs and germanium,
came from Azur Space Solar Power. Solar Junction provided the cells containing
the dilute nitride, processing material supplied by IQE, which has an exclusive
wafer supply agreement with this firm.

Flash tests provided a quick, insightful evaluation of cell
performance. Normally, this test would be undertaken at around 1 sun, but for
these measurements the incident power was 1000 suns. Results revealed the
exceptional uniformity of the Solar Junction cells. 70 percent of them had an
efficiency between 41 percent and 41.5 percent, and a further 20 percent had an
efficiency in excess of 41.5 percent.

Such a high yield is valued for high-volume manufacturing.
In this project, however, it's not necessary, as the wafer provides far more
cells than are needed for the modules - and thanks to the insight provided by
the flash test, just the best can be selected for use. To keep costs down,
cells are added to the module by hand. However, if many modules were going to
be made, assembly would be automated. Note that this does not require
specialist robotic equipment, and could be carried out at many facilities
within Europe.

Once the cells are on the modules, they are tested by
biasing them, so they run as LEDs. Seeing if they glow offers a very quick
route to identifying which cells are working.

Within each of the modules, there are by-pass diodes, which
each sit alongside one of the 234 cells. Their role is two-fold. “If you have
an array where you have shading, it's to keep the output stable,” says Johnson.
In addition, if the cells are wired in series, the diode prevents the failure
of a single cell obliterating the output of the entire module.

Those in the project have built a total of ten modules.
Recently, all of them were shipped to ISFOC, Spain, to undergo indoor testing.
One will then remain there for outdoor testing, where it will be compared with
a first-generation Fullsun module; another will go to Fraunhofer ISE, where it
will be tested on-sun; and the remaining eight will be sent on to the
University of Cyprus, where they can be benchmarked against some more of the
original Fullsun modules and other PV technologies.

At the start of the project on-sun testing was scheduled to
start at the beginning of this year. However, there have been delays, due to
the procurement of the cells. That's not a big issue, however, according to
Johnson. “The reality is that by getting the modules on-sun now in Cyprus, it's
probably the optimum time.”

Evaluation of reliability included monitoring the
performance of twenty encapsulated cells in accelerated degradation tests in
climatic chambers

Testing of the modules should provide some insight into the
values for the performance metrics. One of these is the cost-per-Watt,
anticipated to be $0.90-per-Watt-peak, based on a roadmap of reducing
manufacturing costs as volumes ramp.

A more valued metric is the levelised cost of energy. This
is the energy that is produced, divided by the total system cost over the
lifetime. It is a figure that must include factors such as the module
performance change and lifetime, and the cost of maintenance, so at this stage,
assumptions have to be made. The expectation is that the third-generation
Fullsun technology could realise a levelized cost of energy of 0.04/ kWhr.

Power is transferred from the multi-junction cells by
bonding gold wires, with a thickness of 25 µm, to these devices.

A bright future for CPV?

Even though costs are coming down, it is hard to see CPV
making an impact in the next few years. But there are signs that it could do
further down the line. Johnson is seeing a reduction in the number of suppliers
of silicon cells and modules, and that might start to apply the brakes to price

In contrast, the cost of CPV cells could fall dramatically,
due to growth in the shipments of multi-junction cells to makers of satellites.
Although cells for satellites differ from those for CPV, the changes are minor,
and any reductions in cost are easy to transfer.

Taking the space PV market to a new level is the deployment
of mega-constellations of satellites. Programmes include Space X, One Web, and
Amazon Kuiper, with latter planning to put 3000 satellites into low earth orbit
to provide internet connectivity across the globe.

“Most of these satellites will have a short finite lifetime,
maybe five years, and then they have to be replaced,” says Johnson. “So it will
significantly drive the cell volumes, and obviously there will be pressure to
reduce cell price, which can only help CPV in the long-term.”

Only time will tell if these cost reductions are big enough
to drive a resurgence in CPV, and ultimately spur significant deployment.
Demand for green energy is only going in one direction, so there's hope.
However, let's not raise expectations too high.

US Solar Fund To Acquire Up To 50% Of 200MWDC Mount Signal 2
BayWa R.e. And HeidelbergCement Sign First Solar Corporate PPA In Polish History
SUNfarming Reaches Financial Close On Project Financing For 26 MWp PV Portfolio In Poland
Q CELLS Solar Modules Keeping The Lights On For Dutch Bulb Grower
Leclanché Selected By ENERGODATA To Provide Battery Storage
Greencoat Renewables Announces First Transaction In Nordic Market
Ib Vogt Achieves Financial Close And Start Of Construction Of 116 MWp Solar PV Project In Malaysia
The Smarter E South America Postponed To October 18-20, 2021
Sonnedix Brings Chile Closer To Meet Its Renewable Power Targets
Going Green In Lancashire – Hundreds Of Houses Installed With Solar Panels In Ground-breaking Project
SolarArise Commissions 75 MW Solar Plant In Uttar Pradesh
SUNfarming Secures EUR 10 Million In Fresh Money For Poland
Solar Energy For Water Treatment: IBC SOLAR Helps Water Authority Become More Sustainable
SunBrush Mobil And Infinity Establish Service Base At Benban, Africa's Largest Solar Park
VivoPower International PLC Announces Completion Of Electrical Works For 39 MWdc Molong Solar Farm
Luxcara And GE Renewable To Deliver 753 MW To Sweden With Single Onshore Wind Farm
Sonnedix Acquires 150MW Utility Scale Project Located In Central Chile
Oakapple Renewable Energy Appoint Stuart Gentry To Head Business Development
Driving Efficiency Through Flexible Solar Power Solutions
Analysis Of UK Commercial Roof Space Shows Solar PV Film Can Achieve Net Zero Without Greenfield Sites
International Solar Alliance Special Assembly Elects Dr Ajay Mathur As New Director General
AEG Power Solutions Equips The Microgrid Laboratory Emulator Of Paderborn University
Winch Energy Closes Largest Mini Grid Financing Portfolio To Date
Sonnedix Adds 40 MW Of Capacity To Its Portfolio In Chile

Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Solar + Power Magazine, the Solar + Power Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
{taasPodcastNotification} Array
Live Event