{megaLeaderboard}
{normalLeaderboard}
News Article

Scientists Find Solutions To Perovskite Hurdle

News

Solar cells retain 87 percent of original sunlight-to-electricity conversion performance for more than 2,000 hours

Materials scientists at UCLA and colleagues from five other universities around the world have discovered the major reason why perovskite solar cells degrade in sunlight, causing their performance to suffer over time.

The team successfully demonstrated a simple manufacturing adjustment to fix the cause of the degradation, clearing the biggest hurdle toward the widespread adoption of the thin-film solar cell technology.

A research paper detailing the findings was published in Nature. The research is led by Yang Yang, a UCLA Samueli professor of materials science and engineering. The co-first authors are Shaun Tan and Tianyi Huang, both recent UCLA Samueli PhD graduates.

Perovskite-based solar cells could be manufactured at much lower costs than their silicon-based counterparts, making solar energy technologies more accessible if the commonly known degradation under long exposure to illumination can be properly addressed.

“Perovskite-based solar cells tend to deteriorate in sunlight much faster than their silicon counterparts, so their effectiveness in converting sunlight to electricity drops over the long term,” said Yang, who is also a member of the California NanoSystems Institute at UCLA. “However, our research shows why this happens and provides a simple fix. This represents a major breakthrough in bringing perovskite technology to commercialisation and widespread adoption.”

A common surface treatment used to remove solar cell defects involves depositing a layer of organic ions that makes the surface too negatively charged. The UCLA-led team found that while the treatment is intended to improve energy-conversion efficiency during the fabrication process of perovskite solar cells, it also unintentionally creates a more electron-rich surface — a potential trap for energy-carrying electrons.

This condition destabilises the orderly arrangement of atoms, and over time, the perovskite solar cells become increasingly less efficient, ultimately making them unattractive for commercialization.

Armed with this new discovery, the researchers found a way to address the cells' long-term degradation by pairing the positively charged ions with negatively charged ones for surface treatments. The switch enables the surface to be more electron-neutral and stable, while preserving the integrity of the defect-prevention surface treatments.

The team tested the endurance of their solar cells in a lab under accelerated aging conditions and 24/7 illumination designed to mimic sunlight. The cells managed to retain 87 percent of their original sunlight-to-electricity conversion performance for more than 2,000 hours. For comparison, solar cells manufactured without the fix dropped to 65 percent of their original performance after testing over the same time and conditions.

"Our perovskite solar cells are among the most stable in efficiency reported to date,” Tan said. “At the same time, we've also laid new foundational knowledge, on which the community can further develop and refine our versatile technique to design even more stable perovskite solar cells."

The other corresponding authors on the paper are Rui Wang, an assistant professor of engineering at Westlake University in Hangzhou, China; and Jin-Wook Lee, an assistant professor of engineering at Sungkyunkwan University in Suwon, South Korea. Both Wang and Lee are previous UCLA postdoctoral researchers advised by Yang.

Researchers from UC Irvine; Marmara University, Turkey; and National Yang Ming Chiao Tung University, Taiwan, also contributed to the paper.

The research was supported by the US Department of Energy's Office of Energy Efficiency and Renewable Energy.

REF

'Stability-limiting heterointerfaces of perovskite photovoltaics' by Shaun Tan et al; Nature (2022)

Andea Enters Strategic Partnership With Heliogen
Perovskite Research Offers New Scope For Solar Cells
Fluke Celebrates Engineering Innovation On World Engineering Day
Another Green Check For The Lead-free1 REC Alpha Pure
Ceará To Host Intersolar Summit Brasil Nordeste 2022 In April
BadenovaWärmeplus And SC Freiburg Implement World's Largest PV System
Scientists Find Solutions To Perovskite Hurdle
IBC SOLAR Energy Is Expanding Its Project Portfolio In Hungary
From Lab To Fab: World Record Perovskite Tandem
Q CELLS And Helmholtz-Zentrum Berlin Achieve Efficiency Of 28.7%
Ingeteam Solar Inverters In North Macedonia's First Utility-scale Solar PV Plant
Anesco Gets The Green Light For Trio Of Solar Farms
Otovo Raises €30 Million To Accelerate Entry To Six New Markets
Cation Disorder Engineering Shows Potential Of AgBiS2 Solar Cells
Ingeteam Supplying Solar Inverters For Two Mercury Renew Projects In Brazil
Q CELLS Modules For Europe’s First Solar-powered Aircraft Charging Point
Sonnedix Japan Starts Construction Of Sonnedix Motegi Solar PV Plant
Neoen Chooses Saft To Guarantee Solar Storage Performance In Southern France
German Teams Combine PV Workhorse With Perovskite
Sonnedix Achieve Commercial Operation Of 40MW Soma PV Plant
Removing Solar Panel Hotspots Improves Electrical And Thermal Energy Output
Encavis Increases Green Electricity Production By 29% In 2021
Solartech Pioneer Solivus Lands £2.4 Million Investment
ASCA Acquires The World’s Largest Intellectual Property Portfolio For Printed Organic Photovoltaics

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Solar + Power Magazine, the Solar + Power Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
X
Live Event